Safety Considerations

Safety awareness is the most important thing in the studio. Once you know what can hurt you, you can take precautions. There is no reason to be fearful of chemicals, flames or materials. A healthy outlook is to be present, take steps and measures to be safe and free of dangers.

First we want to address vapors and particles:

  • Any sanding, stirring of powders, sifting of enamels, etc should be accompanied with a particulate mask, such as the RZ perforated mask (www.tonyadavidson.com/blog/recommended-products/)

  • If you are using a fluoridated flux, like Handy Flux, you should also be wearing a vapor mask. I use Prips Flux and I have a very good ventilation systems that takes everything from my bench outside. If you do not have this then I recommend the P100 Dust Half Mask Respirator (see link above). I also recommend you read my blog on Ventilation Hacks for Metalsmiths and work towards setting up a better air flow and vent system. We get one set of lungs and healthcare is too expensive to rule out spending money on tools that will prevent these issues.

Fire:

You want to make sure that your test your equipment regularly for leaks and issues. Hoses get cracked and things get bumped. You want to make sure you have a safety drill practiced in case you have to leave your studio. Are you close enough to shut off the valve to the tank or the emergency cut off valve? If you had to drop your torch have you practiced turning it off quickly and where you would set it.

You want to also make sure you have the right fire extinguisher on hand. Did you know there are several different fire extinguishers? You don’t want the one they sell for kitchens which is for a grease fire. Is it near your bench or at the exit, and have you checked to make sure it is still good? Do you change out your smoke alarm batteries every year?

Do you have some Lavender Oil on hand in case you burn yourself? Do you have a basic first aid kit? In that kit make sure you have some super glue and butterfly strips along with bandaids.

Have you maintained your tools so they work as expected?

Your eyes:

You should wear safety glasses anytime you are working. I have my bench glasses and my magnifiers so they are covered but if I am using the press of something with projectiles or splashing, the kind that cover the sides is the best idea. You can get stick on magnifiers which are on my Tonya Recommends page as well. These stick onto any glasses. I use them on my didymium’s too!

SDS sheets:

All chemicals have Safety Data Sheets (SDS) that will give you important information about storage, usage, and first aid requirements. In most cases they can be downloaded from the manufacturer or seller website. Keep them and your equipment manuals in an easily accessible safety binder in the event you need to refer to them. Make sure you familiarize yourself with the individual characteristics of each chemical in your studio so you can safely handle, store, and use it!

I bought two small cabinets from Wayfair and they store all my chemicals outside. During the winter I move them to the outdoor closet next to my studio and I cover the cabinets with bbq covers. This works really well and I’m happy to share images upon request.

*2026 The Art of Affordable Gold: Part 2 On Demand Encore - Limited Time Offer*

Buy nowLearn more

IMPORTANT INFO

  • SHORTCUT to Tonya’s Online Tool & Supply Shop and 💥 HOW TO ORDER
  • SHORTCUT to Tonya’s Recommended Products
  • Picture Tutorial of Navigating All of Your Content
  • Your 📌DISCOUNT📌 Codes
  • How to use the Video Player for Best Results
  • Save this to your files! How to fix tech issues with accessing this group
  • IMP INFO on FMC TOO (Forged Maker Circle Course/Membership)

Class Information

  • 📌 Terms and Conditions - Creative Work & Use Policy
  • 🍎 About The Class
  • 🙋‍♀️ About Tonya
  • 📅 Dates
  • 💻 Prerequisite Skills and Required Technology
  • 🦺 Safety Considerations
  • Student Release Waiver - Due Date Nov 5th
  • Connect with me on FB - Join the Private Group
  • Video: How to access your FB group
  • Video: How to get notified of posts on your FB group - Don’t miss a thing!
  • How to get the most out of class
  • A Basic List of Metals You Might Need (from the FAQ page)
  • What torch will you need (from the FAQ page of the website)2

Metals & Metallurgy

  • Buy Wire or Make It?.pdf
  • NEW Facts About Gold & Silver
  • Melting Temps of Solder & Metal Recipe Card
  • SIlver-Copper+Phase+Diagram.pdf
  • 2023 Tips for working with 940 Argentium - C Eid1
  • Argentium 940 Pro Tech Sheet 1219.pdf
  • Argentium Quick Start.pdf
  • Argentium Fact File - 0317.pdf
  • Hagstoz Part Numbers and info.pdf
  • What Happens When Steel Enters a Sodium Bisulfate Pickle.pdf

Torches, Pickle, Surfaces and more: approx 15 min of videos

  • NEW Torch & Gas What’s Best
  • NEW: What Surface to Use
  • Quick Notes on Thermal Boards, Charcoal, Graphite.pdf
  • Tips about Torches
  • Your Soldering Station
  • Pickling Station
  • Orca Manual.pdf
  • How to use and set up your EZ Orca Torch
  • How to setup and use a Swiss Torch
  • Swiss Torch.pdf
  • Swiss Torch Regulator Settings
  • Little Smith Manual and Regulator Settings

Resources & Materials: 12 min of videos

  • Books that you should have in your library!.pdf
  • Rolling Mill Comparison master.pdf
  • Video: Rolling Mill Maintenance and Tips
  • Stuller Stone Chart.pdf

Misc: approx 40 min of videos

  • How to Make Iron Binding Nests
  • Ventilation Hacks and Tank Setups
  • Video: Setting Up Your Bench

Session 1: 3 hours and 57 min of videos

  • Video: Class #1
  • 2025 AAG P2 Slide Deck.pdf
  • 2025 Slides Class - 1.pdf

Session 2: 4 hours and 19 min of videos

  • Video: Class #2
  • Video: Choosing Wire for Am Contemporary Bimetal and MORE
  • Video: Enriching Silver Review

Session 3: 3 hours and 27 min of videos

  • Video: Class #3
  • Slides from Class #3 AAG Part 2.pdf
  • Video: How to Make Fairy Dust

Session 4: 4 hours and 19 min of videos

  • Video: Class #4
  • Slides from Class #4 Part 2 AAG.pdf

Session 5: 3 hours and 51 min of video

  • Video: Class #5
  • Slides AAG Part 2 Class #5.pdf
  • Solder Application as Surface Gold Application.pdf
  • Tonya Davidson Letterhead Hoover & Strong.pdf